Identification approaches for steel strip surface defects in hot rolling Process

Authors

  • Zoheir MENTOURI a Laboratory of Advanced Control (LABCAV), University of May 8th 1945, Guelma, Algeria / b Research Center in Industrial Technologies (CRTI), BP64, Chéraga 16014, Algiers, Algeria
  • Abdelkrim MOUSSAOUI Laboratory of Electrical Engineering (LGEG), University of May 8th 1945, Guelma, Algeria
  • Djalil BOUDJEHEM Laboratory of Advanced Control (LABCAV), University of May 8th 1945, Guelma, Algeria
  • Adel BOUDIAF Research Center in Industrial Technologies (CRTI), BP64, Chéraga 16014, Algiers, Algeria
  • Slimane ZIANI Research Center in Industrial Technologies (CRTI), BP64, Chéraga 16014, Algiers, Algeria

Keywords:

Computer vision, Detection & Classification, Rolling process, Quality & Surface defects

Abstract

In steel manufacturing process, flat products are greatly concerned with the surface quality and the possibilities of its on-line
inspection. The visual control is obviously unable to continuously check the surface of the moving product, and the control at the ending stage remains not suitable although, it may provide information about process trends and parameters history. So, strip surface defects that are not detected yield to product downgrading or to costly rework operations for producer and/or end users. With such needed quality level, steel surface inspection systems are more and more implemented for detecting defects and allowing correction at appropriate time. Based on Computer vision, these applications make a use of detection and classification algorithms to identify these arising defects. The present work is related to a Project of a scientific and economic impact: The Development of an on-line inspection system for strip surface defects identification during the thermo-mechanical treatment in hot rolling process. We asses, in this work, some approaches in labeling each of the defects belonging to a database created for this aim. This Dataset is compound of five, among the most frequent, surface defect types and with 108 variants of each one. Obtained results shown the importance of the choice of a relevant image features extractor.

References

Neogi N., Mohanta D. K. and Dutta P. K., “Review of vision-based steel surface inspection systems”, EURASIP Journal on Image and Video Processing (2014), http://jivp.eurasipjournals.com/content /2014/1/50

Xie X., “A Review of Recent Advances in Surface Defect Detection using Texture analysis Techniques”, Electronic Letters on Computer Vision and Image Analysis 7 (3) (2008) 1-22, Published by Computer Vision Center / Universitat Autonoma de Barcelona, Barcelona, Spain

Wu G., Kwak H., Jang S., Xu K., Xu J., Design of Online Surface Inspection System of Hot Rolled strips (Proceedings of the IEEE International Conference on Automation and Logistics Qingdao, China, 2008), pp. 2291–2295

Caleb P., Steuer M., Classification of surface defects on hot rolled steel using adaptive learning methods, KES’2000, Fourth international conference on knowledge-based intelligent engineering systems and allied technologies. Proc. 1 (2000) 103–108

Shiyang Zhou, Youping Chen, Dailin Zhang, Jingming Xie, Yunfei Zhou, “ Classification of Surface Defects on Steel Sheet Using Convolutional Neural Networks”, MATERIALS AND TECHNOLOGY, doi:10.17222/mit.2015.335, (2016); at: https://www.researchgate.net/publication/ 313896846

Maoxiang CHU, Rongfen GONG and Anna WANG. “Strip Steel Surface Defect Classification Method Based on Enhanced Twin Support Vector Machine”, ISIJ International, 54 (1) (2014)119–124

Bhandari S. H., Deshpande S. M., Deshpande S. M., “A Simple Approach to Surface Defect Detection”, 2008 IEEE Region 10 , Colloquium and the Third International Conference on Industrial and Information Systems, Kharagpur, December 8-10, (2008), INDIA.

Doo-chul Choi, Yong-Ju Jeon, Jong Pil Yun, Sung Wook Yun, and Sang Woo Kim , An Algorithm for Detecting Seam Cracks in Steel Plates World Academy of Science, Engineering and Technology, International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 6 (12) (2012) 2835-2838

Yong-JuJeon, Doo-chul Choi, Jong Pil Yun, Changhyun Park, Homoon Bae, and Sang Woo Kim , Automated Inspection Algorithm for Thick Plate Using Dual Light Switching Lighting Method, International Journal of Electrical, Computer, Energetic, Electronic and Communication Engineering, 6 (12) (2012) 1475-1478

Chaitali Tikhe, Chitode J.S., Metal Surface Inspection for Defect Detection and Classification using Gabor Filter, International Journal of Innovative Research in Science, Engineering and Technology (An ISO 3297: 2007 Certified Organization), 3 (6) June 2014

Golub G.H., “The Generalized Eigenvalue Problem”, Lectures on Matrix Computation,Ph.D program of the Dipartimento di Matematica “Istituto Guido Castelnuovo”, Lecture No. 11, Roma, 2004.

Daniel L. Swets, John (Juyang) Weng, “Using Discriminant Eigenfeatures for Image Reteival”, IEEE Transactions on Pattern Analysis and Machine Intelligence, 18 (8) August 1996.

Vol_10_Issue_01_January_2018

Downloads

Published

01/19/2023

How to Cite

MENTOURI, Z., MOUSSAOUI, A., BOUDJEHEM, D., BOUDIAF, A., & ZIANI, S. (2023). Identification approaches for steel strip surface defects in hot rolling Process. Revue Nature Et Technologie, 10(01), 58–63. Retrieved from https://journals.univ-chlef.dz/index.php/natec/article/view/127

Issue

Section

Fundamental & Engineering Sciences

Similar Articles

1 2 3 4 > >> 

You may also start an advanced similarity search for this article.